Monochromatic Light Source

Monochromatic Light Source

Approx. Rs 24,700 / Piece

Prisms India offers two different types of Monochromatic Light source. Monochromatic Light sources are used in Calibration labs for inspection of Micrometer Anvils & Mechanical Seals, Pump Valves and various other Automotive Parts manufacturers. Prisms India Monochromatic Light Source provides highly diffused Sodium light for use in testing flatness of flat parts with Master Optical Flats. Sodium Vapour Light is directed on to the component under inspection through a plane acrylic sheet with a straight line marked on its face. It produces Excellent Contrast Fringes.

Model MLS-01: This is used when the Optical Flat is less than 150 mm diameter. The Optical Flat is placed over the polished part under inspection. The light bands are viewed over the Optical Flat from above

Model MLS-02: The part to be inspected is placed over the Optical Flat and the light bands are viewed from beneath after reflection from a mirror. This Type Monochromatic Light Source is used when the part under inspection is thin and of large diameter. If an Optical Flat of large diameter is to be placed on such thin parts there would be deformation of fringes due to the weight of large size Optical Flat. To avoid this the part to be inspected is placed over the Optical flat and the fringes are viewed after reflection from a mirror placed below.

The Master surface of the Optical Flat face upwards and the test surface face downwards and are in contact to view the light bands. MLS-02 is suitable for use with 200 mm diameter Optical Flat. On request MLS to suit Optical Flats larger than 200 mm diameter is manufactured against specific Order.

InstrumentDimensionsPacked DimensionsNet WeightGross Weight
MLS-01410 x 280 x 450 mm635 x 457 x 406 mm8.75 Kgs13 Kgs
MLS-02520 x 400 x 325 mm635 x 457 x 406 mm16.25 Kgs20 Kgs

Additional Information:

Monochromatic Checklight

Monochromatic Checklight

Approx. Rs 30,000 / each

Useful when the part to be inspected is large and thin.  The surface of the part to be inspected is placed over the Optical Flat and the Light Bands are viewed after reflection from a mirror placed below the Optical Flat

Additional Information:
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material


Looking for Monochromatic Light Source ?


    We will contact you soon !

    Jayaram Vaddadi

    (Managing Director)

    Prisms India Private Limited

    Marie Oulgaret, Pondicherry - 605009, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us